Washing Machine Error Codes

Washing Machine Error Codes
Washing machine error codes, most of todays modern washing machines will have a digital display and when something goes wrong will display an error code here are some for Hotpoint WML520 WDL520 washers.

Hotpoint WML520/WDL520/BHWD with progress lights on right of facia.
Same for other recent models with this control panel setup.

F01 Motor triac short circuit: Check motor and module connections
F02 Motor jammed / tacho detached: Check motor and module connections
F03 NTC short/open circuit: Check thermistor and module connections
F04 Pressure switch jammed on empty: Check switch and module
F05 Pressure switch jammed on full or pump blocked: Check pump and switch
F06 N/A
F07 Heater relay stuck: Check heater and module connections
F08 Heater relay stuck: Check pressure switch, heater and module connections
F09 Setup error: Check Eeprom
F10 Pressure switch not sensing: Check switch and module connections
F11 Pump cannot be activated: Check pump, connections and wiring
F12 No communication between cards: Check module connections
F13 High temperature Rise In Drying: Reduced air flow through dryer heater assembly.
Check operation of fan motor and dryer filter for blockage
F14 No Heat In Drying: Check one shot thermostat. Check heater, valve and fan
motor module connections. Edge connector J10
F15 No Drying: Possibly dryer relay open circuit
F16 N/A
F17 Door lock error: Check door, door lock and module connections
F18 Communication error (3 phase motor): Replace power board
You can find all your Hotpoint Washer Parts