Beko Oven Element 1800 Watts

Replacement 1800 Watt Beko Cooker Element

High Performance Oven Element Will Fit Selected Beko Cookers

This is the same element our own service engineers use when repairing customers ovens, so be assured it is of high quality.

People often ask.

How Do I Change The Element In My Beko Oven

Its the same procedure for almost every make and model of cooker, please follow the guidlines below and you should be able to do the repair yourself saving you some money.

1, Disconnect the cooker from the mains supply / switch off the cooker.

2, Remove all shelves out of the oven, then you will be able to see the cover at the back of the oven that protects the element and the fan motor, remove the 4-6 screws that hold this in place then pull it out of the way and you will see the element and fan motor, some elements are held in place by 2 screws so reove these and the element should pull forward with the wires still attached.

3, If you cannot see the screws holding the element in place you will have to remove the cooker from the housing and take the back of to remove the element, replace the new element and reverse all procedures and you should be good to go.

Some Information About This Element

Approx sizes

2 Turn
1800 watts
Length 225 mm
Width 193 mm
Bracket : 70 mm
Tags: 18 mm
Not threaded