Hotpoint Creda 30mm bearing kit
Many of these models could have been fitted with either 30mm bearings or 35mm bearings. To be certain that the correct kit s ordered, if you measure the inner diameter of the rear small bearing and it is approx 26mm then you need 30mm bearings kit, if it is 30mm you will need the 35mm bearings kit. |
Genuine Hotpoint washing machine drum bearings, these are the 35mm bearings, some Hotpoint machines are fitted with the 30mm bearings, so please make sure these are the ones you need. Common reasons for replacing the drum bearings are, noisy machine when spinning, sometimes you may notice oil or rust marks on your clothes after you have washed them.
Many of these models could have been fitted with either 30mm bearings or 35mm bearings. To be certain that the correct kit s ordered, if you measure the inner diameter of the rear small bearing and it is approx 26mm then you need 30mm bearings kit, if it is 30mm you will need the 35mm bearings kit. |
Hotpoint washing machine drum bearings fits the WMA range of appliances fitted with the 35mm bearings.
Many of these models could have been fitted with either 30mm bearings or 35mm bearings. To be certain that the correct kit s ordered, if you measure the inner diameter of the rear small bearing and it is approx 26mm then you need 30mm bearings kit, if it is 30mm you will need the 35mm bearings kit. |
genuine Hotpoint washing machine drum bearings and spider kit part number C00203636 |
Genuine Hotpoint washing machine drum bearing kit includes 2 bearings and the water seal, bearings are the 22mm size, part number C00203003. |
Hotpoint washing machine front drum plate seal will fit selected Hotpoint and Creda washing machines.
This seal should be replaced each time you remove the front drum plate to prevent leaking. |
Copyright © 2005-2022 Spares Direct 2 U Ltd. All Rights Reserved. Website Design & Developed by instaCommerce.