If your Flavel cooker has stopped getting hot it could be the element that has failed, has it tripped your electric?
Most elements in fan ovens can be viewed if you take the cover off in the back of the oven, usually held in place with 4 or 6 screws remove that and you should be able to visually inspect the element if its distorted or split it will need replacing, if there are no signs of this it will need testing with a multi meter for continuity, before you attempt any repair make sure you isolate the cooker from the mains voltage.
Flavel Milano E50 Cooker Fan Element
Genuine manufactuers spare part, this element is rated at 1600 watts, some cookers were fitted with a larger element so its worth checking to see if you have the correct one.
Most oven elements can be replaced from the front without removing the cooker from the housing.
Element For Flavel Milano E100 2100 Watts
Common faults when fan oven element has failed are fan is going lights on and no heat, or after inspection of the element you can visually see splits or blow marks on the element.
Genuine Flavel cooker element will fit Milano E60 cooker, this element is rated at 2100 watts, and measures approximately 250mm long, 190mm wide, bracket 70mm, and tags 25mm, common faults when fan oven element has failed are fan is going lights on and no heat, or after inspection of the element you can visually see splits or blow marks on the element.
Genuine Flavel cooker element 1600 Watts will fit selected Flavel ovens.
Genuine Flavel cooker element 1800 Watts part number 462900010 will fit selected Flavel cookers, common cooker faults associated with elements is no heat and tripping your RCD.
Genuine Flavel cooker element will fit selected Flavel ovens, this element is rated at 2100 watts and has 2 turns.
Common faults reported when the fan oven element has failed will be the fan is working and the oven light is on, but there is no heat, generally the element will have gone open circuit or will have visual blow marks and will certainly need replacing.